Continuum robots achieve precise motion with advanced friction modeling

Modeling the Frictional Contact of Continuum Robots with Environments through Linear Complementarity Problem

Robotics

Summary

Controlling the movement of flexible robots that bend and twist, called continuum robots, is tricky because friction from their surroundings can make them move unpredictably. The authors created a new way to model how friction works when these robots touch things around them, capturing even sticky forces and the lag in movement changes. Their model helps predict how the robot will actually behave, making its movements more accurate. They tested this on a real robot and found it made the robot’s tip much closer to where it was supposed to be.

What this means in practice

  • For robotics control engineers: Improve motion planning and control accuracy of flexible robots interacting with environments using friction-aware models.
  • For medical device developers: Design continuum surgical robots with better tip positioning by accounting for friction from tissue contact during procedures.

Authors

Jia Shen, Junhyoung Ha, Yue Chen

Abstract

Accurate friction modeling in continuum robots is essential for precise motion control and path planning. However, current approaches make predictions only for the mechanism's internal friction that is limited by the boundary forces of the Coulomb friction cone, which fail to characterize the static friction and motion hysteresis. In this paper, we propose a novel friction model based on complementarity constraints under the Coulomb friction assumption. This model predicts various friction effects caused by environmental interactions, including both static and sliding frictions and hysteresis behavior, as well as the corresponding robot deformation induced by these interactions, which are crucial for the practical motion planning and control of continuum robots. Additionally, real-time implementation of this model can be achieved, meeting the demand for computational efficiency in robotic applications. Experimental validations demonstrated that this model is able to reduce the maximum tip position error from 45.4 mm in the frictionless model to 5.85 mm in our friction-included model with a 287.9 mm-long tendon-driven continuum robot.