Quadrotors optimized to change shape for flying through narrow gaps
Task-Driven Closed-Loop Design Optimization of Passively Morphing Quadrotors for Contact-Mediated Narrow Gap Traversal
Robotics
Summary
Drones often need to fly through spaces smaller than their usual size, but it's hard to design them to shrink only when needed without hurting flight. The authors developed a method that tries out different drone arm designs in computer simulations, checking how well they can shrink and pass through tight openings without losing control. Their final drone can shrink its width by more than half to fit through a 15 cm gap while flying fast, and it still flies well when not squeezing through tight spaces. This approach helps make drones that automatically adapt their shape to tricky environments.
What this means in practice
- •For drone designers: Design drones that adjust their shape passively to pass through narrow gaps while maintaining flight performance.
- •For search and rescue teams: Deploy drones capable of squeezing through confined spaces in cluttered environments to reach trapped victims.
Authors
Etor Arza, Luca Girardi, Gabriel Maquignaz, Javier Paez, Stefan Leutenegger, Stefano Mintchev, Kostas Alexis
Abstract
Aerial robots operating in cluttered environments may encounter openings narrower than their nominal width. Existing passively morphing drones reduce their width upon traversal, but they typically involve human-made designs, which can struggle to find the right balance among folding ratio, flight efficiency, and control tracking performance. We introduce a closed-loop design method that jointly optimizes quadrotor geometry and the torque-deflection response of two passively folding arms driven by the success rate in simulation for contact-mediated gap traversal. An optimization algorithm samples candidate designs that are evaluated in a contact-based simulation of the traversal task, where the task success rate is used as a feedback signal to sample progressively better designs over time. The resulting prototype passively reduces its width from 31.3 to 14.1 cm and traverses a 15 cm wide opening at a 2 m/s reference speed. It also tolerates gap approach-angle errors of up to 30 degrees and folds through a 40 cm long confined passage. Compared to a rigid twin, the soft configuration adds only 2 mm of position RMSE and less than 1% electrical power during contact-free flight. These results show that task-driven closed-loop design optimization can produce passively morphing airframes that are compact under contact, tolerant to approach error, and effectively rigid during nominal flight.