Papers for

drone designers

Papers whose findings have a practical use for this group, as judged from the abstract. Open a paper to read what it means in practice.

Quadrotors optimized to change shape for flying through narrow gaps

Task-Driven Closed-Loop Design Optimization of Passively Morphing Quadrotors for Contact-Mediated Narrow Gap Traversal

Abstract: Aerial robots operating in cluttered environments may encounter openings narrower than their nominal width. Existing passively morphing drones reduce their width upon traversal, but they typically involve human-made designs, which can struggle to find the right balance among folding ratio, flight efficiency, and control tracking performance. We introduce a closed-loop design method that jointly optimizes quadrotor geometry and the torque-deflection response of two passively folding arms driven by the success rate in simulation for contact-mediated gap traversal. An optimization algorithm samples candidate designs that are evaluated in a contact-based simulation of the traversal task, where the task success rate is used as a feedback signal to sample progressively better designs over time. The resulting prototype passively reduces its width from 31.3 to 14.1 cm and traverses a 15 cm wide opening at a 2 m/s reference speed. It also tolerates gap approach-angle errors of up to 30 degrees and folds through a 40 cm long confined passage. Compared to a rigid twin, the soft configuration adds only 2 mm of position RMSE and less than 1% electrical power during contact-free flight. These results show that task-driven closed-loop design optimization can produce passively morphing airframes that are compact under contact, tolerant to approach error, and effectively rigid during nominal flight.

Fri 6 NovRobotics
The gist
Drones often need to fly through spaces smaller than their usual size, but it's hard to design them to shrink only when needed without hurting flight. The authors developed a method that tries out different drone arm designs in computer simulations, checking how well they can shrink and pass through tight openings without losing control. Their final drone can shrink its width by more than half to fit through a 15 cm gap while flying fast, and it still flies well when not squeezing through tight spaces. This approach helps make drones that automatically adapt their shape to tricky environments.
Open → 2611.09272v1

Parametric 3D wing dataset created to improve AI aerodynamic predictions

Ground-Wing: A Parametric 3D Wing-in-Ground-Effect Dataset for Benchmarking Neural Surrogate Models

Abstract: This paper presents a CFD dataset of a highly parametrized 3D wing operating in ground effect, designed for benchmarking neural surrogate models for aerodynamic prediction, using a wing shape and flow conditions typically encountered in motorsport applications. The dataset comprises 770 RANS simulations of 194 unique wing configurations, sampled across 27 airfoil profile variants and 4 distances from the ground, spanning variations in wing sweep, chord, taper, angle of attack, and tip twist. Six neural network architectures representing distinct paradigms --- convolutional (DoMINO), graph-based (X-MeshGraphNet), transformer-based (AB-UPT, GeoTransolver, GAOT), and JEPA-based (AeroJEPA) --- are evaluated on their ability to predict surface pressure coefficient and wall shear stress distributions, from which integral drag and lift coefficients are recovered. The dataset is intended to be used as a challenging benchmark for surrogate CFD models, due to the uniqueness of the ground effect being absent from other wing and airfoil datasets.

Tue 3 NovMachine Learning
The gist
Predicting how air flows around airplane wings is important but complicated, especially when wings are close to the ground. The paper introduces a new collection of detailed computer simulations of 3D wings flying near the ground, which is common in motorsport. The data helps test different kinds of AI models that try to predict aerodynamic forces quickly without full physics simulations. The authors compare six AI architectures to see which predict pressures and forces best on these tricky wing shapes.
Open → 2611.04571v1