Rms delay spread estimates vary with power threshold in 33 GHz channels

Sensitivity of RMS Delay Spread Estimation to Power Delay Profile Thresholding in Time-Varying Channels at 33 GHz

Information Theory

Summary

Estimating how much radio signals spread out over time is important for understanding wireless connections. The authors studied how the way you cut off weak signals affects this estimate at 33 GHz in a setting with moving vehicles. They found that using a lower cutoff threshold shows a bigger spread, but after a point the estimates stabilize. This shows it is important to choose the right threshold to get consistent and reliable channel measurements.

What this means in practice

  • For wireless network engineers: Improve design of 33 GHz wireless links by selecting power thresholds that yield consistent delay spread estimates in urban environments with moving vehicles.
  • For automotive radar developers: Fine-tune radar signal processing algorithms by understanding how power thresholding affects delay spread estimates in dynamic road scenarios at millimeter-wave frequencies.

Authors

Jarosław Wojtuń, Bartosz Czaja, Tomasz Grasza, Jan M. Kelner, Cezary Ziółkowski, Radek Zavorka, Josef Vychodil, Tomas Mikulasek, Jiri Blumenstein, Ales Prokes, Aniruddha Chandra

Abstract

Root mean square (RMS) delay spread is a key parameter characterizing temporal dispersion in radio propagation channels. Its estimation from measured power delay profiles (PDPs), however, depends strongly on the adopted power threshold. This paper investigates the sensitivity of RMS delay spread estimates to relative PDP thresholding in a time-varying millimeter-wave channel at 33 GHz. The analysis uses wideband channel sounding measurements conducted in a dynamic road environment with moving vehicles. The temporal evolution and empirical cumulative distributions of RMS delay spread are evaluated for thresholds ranging from -20 to -50 dB. Reducing the threshold increases the median RMS delay spread from approximately 140 to 168 ns and the 90th percentile from 200 to 210 ns. Both statistics converge at lower thresholds, with -40 dB providing a practical convergence level. The results emphasize the importance of threshold selection for reliable channel characterization and consistent comparison of measurements.