Localized heating enables carbon electrodes on CMOS chips safely
Localized Joule heating and carbonization process optimization of 3D printed polymer structures for lab-on-CMOS applications
Emerging Technologies
Summary
Making tiny carbon electrodes on computer chips can help create small devices for testing and sensing. Normally, turning plastic parts into carbon needs very high heat that damages the chips. The authors found a way to heat just the right tiny parts using electricity, so they turn into carbon without hurting the rest of the chip. They tested this approach with models and actual experiments, showing it works at safer temperatures. This method could help build better small sensors integrated directly on chips.
What this means in practice
- •For lab-on-chip device engineers: Create integrated carbon electrodes on CMOS chips with minimized heat damage using localized Joule heating for improved biosensors and lab sensors.
- •For environmental sensor developers: Fabricate carbon nanostructures on sensors without harming CMOS circuits, enabling more durable and precise environmental monitoring devices.
Authors
Mohammad Aminul Haque, Andalib Nizam, Nickolay Lavrik, Nicole Mcfarlane
Abstract
Use of carbon electrodes integrated with CMOS technology has great promise for lab-on-chip, biomedical, environmental, and industrial applications. One method of developing carbon electrodes is to 3D print polymer nanostructures on a CMOS chip, and use a thermal annealing process to pyrolyze them into carbon at high temperature, approximately 950 °C. Such high temperature is detrimental to the CMOS sensor circuits, causing severe degradation. We present a novel solution of localized Joule heating of these polymer nanostructures to achieve complete carbonization of the electrodes. Both analytical and COMSOL simulations guided the experiments to characterize the carbonization process conditions. Partial carbonization was achieved at 500-600 °C of global temperature, and complete carbonization was achieved by localized Joule heating. Pyrolized nanostructures monolithic samples on a silica wafer were fabricated using standard material processing, such as 2-Photon Polymerization. Pyrolysis was achieved by Rapid Thermal Processing (RTP). Observations using optical microscopy, scanning electron microscopy, and Raman spectroscopy demonstrated the feasibility of polymer carbonization within a CMOS compatible temperature window.