Papers for

environmental sensor developers

Papers whose findings have a practical use for this group, as judged from the abstract. Open a paper to read what it means in practice.

Soft robots convert sunlight into rapid motion without batteries

SunLightBots: Turning sunlight into self-sustained, high-power motion in soft robots

Abstract: Soft robots built from active materials can directly convert environmental stimuli into motion, offering a route to energy autonomy and embodied control. However, environmental energy is generally harvested at low power, whereas rapid, mechanically demanding actions require high mechanical output power. Reconciling this mismatch while sustaining self-regulated cyclic actuation is challenging, particularly at the subgram scale, where limited payload capacity constrains the integration of conventional power and control hardware. Here, we present SunLightBots, a class of subgram, sunlight-powered, untethered soft robots that achieve autonomous locomotion under continuous illumination near 1 Sun (100 mW/cm2). Their operation is enabled by a self-resetting snapping (SRS) mechanism that integrates liquid crystal elastomers (LCEs) with snap-through instability to accumulate solar energy supplied at low power, release it as rapid, high-power motion, and reset through photothermal-mechanical feedback. Through coordinated optimization of the LCE actuation temperature, photothermal conversion, actuation stress, and structural energy barrier, the system operates near 1 Sun and achieves a peak mass-specific mechanical power of 89 W/kg. At this irradiance, the optimized LCE generates an actuation stress of 0.1 MPa at approximately 60 deg C. SunLightBots demonstrate sustained swimming, crawling, and repeated impulsive jumping. Under 1.5 Suns, the swimmer advances more than three body lengths per cycle. This work provides a materials-mechanics route toward autonomous soft robots powered entirely by the environment.

Tue 10 NovRobotics
The gist
Soft robots usually need batteries or external power to move quickly, but the authors found a way to make tiny, lightweight robots move fast using only sunlight. They created a mechanism called self-resetting snapping that stores energy slowly from sunlight and then releases it quickly to make motion like swimming or jumping. This approach works at normal sunlight levels and keeps going as long as the light shines. The authors showed that these robots can crawl, swim, and jump by themselves without traditional power sources.
Open → 2611.14729v1

Localized heating enables carbon electrodes on CMOS chips safely

Localized Joule heating and carbonization process optimization of 3D printed polymer structures for lab-on-CMOS applications

Abstract: Use of carbon electrodes integrated with CMOS technology has great promise for lab-on-chip, biomedical, environmental, and industrial applications. One method of developing carbon electrodes is to 3D print polymer nanostructures on a CMOS chip, and use a thermal annealing process to pyrolyze them into carbon at high temperature, approximately 950 °C. Such high temperature is detrimental to the CMOS sensor circuits, causing severe degradation. We present a novel solution of localized Joule heating of these polymer nanostructures to achieve complete carbonization of the electrodes. Both analytical and COMSOL simulations guided the experiments to characterize the carbonization process conditions. Partial carbonization was achieved at 500-600 °C of global temperature, and complete carbonization was achieved by localized Joule heating. Pyrolized nanostructures monolithic samples on a silica wafer were fabricated using standard material processing, such as 2-Photon Polymerization. Pyrolysis was achieved by Rapid Thermal Processing (RTP). Observations using optical microscopy, scanning electron microscopy, and Raman spectroscopy demonstrated the feasibility of polymer carbonization within a CMOS compatible temperature window.

Sun 11 OctEmerging Technologies
The gist
Making tiny carbon electrodes on computer chips can help create small devices for testing and sensing. Normally, turning plastic parts into carbon needs very high heat that damages the chips. The authors found a way to heat just the right tiny parts using electricity, so they turn into carbon without hurting the rest of the chip. They tested this approach with models and actual experiments, showing it works at safer temperatures. This method could help build better small sensors integrated directly on chips.
Open → 2610.15238v1

Human HVAC interaction design supports healthy and affordable heating in smart homes

Designing for Healthy, Affordable, and Sustainable Human-HVAC Interactions for Heating in Smart Homes

Abstract: As geopolitical tensions, energy crises, and energy-intensive AI infrastructure intensify concerns about demand, affordability, and resilience, communities increasingly encounter these challenges through everyday energy practices, particularly winter heating. Against this background, the doctoral exposé, "Designing Human-HVAC Interaction for Healthy, Affordable, and Sustainable Heating in Smart Homes", is structured around four chapters. First, a multidisciplinary literature review defines and positions Human-HVAC Interaction, focusing on heating in smart homes. Second, longitudinal living lab studies with design probes examine everyday heating practices, thermal comfort, and indoor environmental quality, with attention to thermally vulnerable groups such as older adults, pregnant or menopausal women, parents with infants, and people affected by allergies or airborne pollutants. Third, a VR-based smart home demonstrator explores how heating and IEQ scenarios can be prototyped and evaluated as a virtual living lab, while critically examining the limits of representing bodily indoor climate conditions through VR. Fourth, follow-up design studies examine how VR-based insights can be translated into physical-digital prototypes that combine digital fabrication, distributed environmental sensing, and diverse interface forms for critical heating and IEQ contexts. The thesis aims to contribute a design-oriented understanding of Human-HVAC Interaction by building from a multidisciplinary literature review to empirical living lab and co-design studies, VR-based prototyping, and physical system development, examining how smart home users make sense of, negotiate, and respond to smart HVAC system.

Mon 7 SeptHuman-Computer InteractionComputers and SocietyMultimedia
The gist
Many people struggle with controlling heating in their homes to stay comfortable without spending too much or using too much energy. The authors study how people interact with heating systems, especially in smart homes, and how this affects health and costs. They use real-life studies and virtual reality to better understand heating needs, especially for sensitive groups like older adults or parents with infants. Their work helps create better ways for people to manage heating that balance comfort, health, affordability, and sustainability.
Open → 2609.07936v1