Python code speeds 3D design optimization using consumer graphics cards

An open source Python code for three-dimensional topology optimization in single precision on a consumer GPU

Computational Engineering, Finance, and ScienceMathematical Software

Summary

Designing strong, lightweight 3D structures involves solving huge math problems that take a lot of computer power. The authors created a Python program called TOF3D that runs these problems much faster on common gaming graphics cards by using simpler number calculations. They tested it on several design types, from stress limits to bone-like structures, and showed it matches professional software results closely. This makes complex 3D design optimization more accessible and quicker on everyday computers.

What this means in practice

Authors

Leonilson Toffoli Pedrini, Rodolfo G. M. Andrade, Rafael M. Ferro

Abstract

Three-dimensional topology optimization solves linear systems with millions of unknowns at every design iteration. Consumer graphics cards run far faster in single than in double precision, and open codes for them mostly address minimum compliance. This educational article presents TOF3D, an open source Python code for density-based topology optimization in single precision on one consumer GPU. It solves four classes of problems: stress constrained minimum compliance, robust minimum compliance against manufacturing errors, compliant mechanisms and bone-like porous infill. The stiffness operator is applied without assembly, and the conjugate gradient method is preconditioned by geometric multigrid. Rounding the element matrix to single precision gave rigid body motions a spurious energy and changed compliances by up to 5.4%. Forming the element products from differences of nodal displacements reduced this error to $1.3\times 10^{-5}$ at no cost in time. Adjoint sensitivities agreed with finite differences to within $1.7\times 10^{-6}$, and the solutions agreed with Ansys Mechanical APDL to within $4.1\times 10^{-10}$ with the same element. On an RTX 3060 with 12 GB, one design iteration of a cantilever took 0.46 s with 0.5 million elements and 15 s with 33.5 million. On the same card and problem, an open GPU code that applies its operator in double precision took 3.7 and 21 s with 0.5 and 4.2 million elements and ran out of memory on larger meshes. Eight cases fixed in a protocol before the runs took 9 to 35 minutes each with 4.2 to 5.2 million elements.