Agentic AI improves planning for robotic 3D printing with six-axis arms
Kinematics-Grounded Agentic AI for Robotic Additive Manufacturing Process Planning
RoboticsArtificial Intelligence
Summary
Robotic 3D printing can be tricky because plans that look good on a computer might not actually work well with a robot’s joint movements and arm positions. The authors created an AI framework that thinks carefully about the robot’s arm and movements before printing. Their system uses AI to understand the printing goals, then uses specialized tools to make and check print plans that work smoothly with the robot’s movements. Their tests showed the plans could greatly reduce robot joint stress and speed up printing compared to less optimized plans.
What this means in practice
- •For robotics engineers: Generate 3D printing plans optimized for complex robotic arms to reduce wear and improve print speed in custom manufacturing setups.
- •For industrial manufacturing teams: Produce robot-specific additive manufacturing instructions that meet quality goals while minimizing mechanical strain and production time.
- •For automation software developers: Build AI-driven software that adapts slicing and robot movement plans into cohesive, executable manufacturing workflows for multi-axis printers.$Commercial implications: Enables sale of integrated AI process planning platforms tailored to industrial robotic 3D printing systems.
Authors
Jingzhan Ge, Ruimin Chen, Azadeh Haghighi, Jiong Tang, Farhad Imani
Abstract
Robotic additive manufacturing (AM) extends material-extrusion printing beyond gantry kinematics but makes process planning robot-dependent. A slicer-generated plan that appears favorable in part coordinates can become infeasible or robotically unfavorable on a manipulator because slicer-process decisions and part orientation determine the generated path, while part orientation and workspace placement affect its kinematic realization. Existing AM tools, large language model (LLM)-based decision-support methods, and digital-shadow systems do not provide integrated pre-execution evaluation of these coupled decisions. This paper presents agentic robotic additive manufacturing (A-RAM), an agent-specialist-tool framework that converts user intent and a part file into traceable, execution-ready plans. The LLM interprets manufacturing objectives and constraints, identifies prescribed and searchable planning variables, and encodes this reasoning in a schema-constrained request; a deterministic Planning Agent instantiates the corresponding search workflow, while domain tools compute quantitative evidence for slicing, placement, inverse kinematics, trajectory timing, Joint-6 jerk, and extrusion. The framework is evaluated on a six-axis robotic-arm AM cell through three case studies covering expert-specified planning, goal-only planning, objective-dependent infill screening, and geometry-dependent orientation-placement selection. Across the evaluated candidate sets, selected plans achieve up to 53.5% lower maximum Joint-6 jerk and 48.3% lower mean absolute Joint-6 jerk than the least favorable valid candidates, while objective-specific infill screening yields motion-plan completion times up to 40.1% shorter and extrusion paths up to 12.7% shorter than the corresponding least favorable screened patterns.