Papers for

wireless network developers

Papers whose findings have a practical use for this group, as judged from the abstract. Open a paper to read what it means in practice.

Synthetic data improves drone signal prediction with less real flight data

Measurement-Calibrated Synthetic Pretraining for Rapid Adaptation of UAV Channel Predictors

Abstract: Unmanned aerial vehicle (UAV) links can change faster than route-specific channel data can be collected, so a channel predictor must often be adapted from only a short target-flight calibration segment. This paper studies measurement-calibrated synthetic pretraining as an offline source prior for rapid adaptation of channel state information (CSI) predictors. The synthetic source is calibrated to flight-only power evolution, temporal shape variation, frequency selectivity, and phase disturbance, and is then combined with measured source-flight fine-tuning before target-flight adaptation. Under chronological held-out flight splits, synthetic-to-real (S2R) fine-tuning reduces the measured-data budget needed to reach useful prediction in the low-data regime. For 50 ms-ahead prediction, it crosses a latest-channel-estimate persistence baseline with 50 measured training windows, roughly 0.5 s of 10 ms-spaced supervised windows, whereas training from scratch requires 600 windows. A target-prefix adaptation study further shows that a lightweight gated recurrent unit predictor can reuse the pretrained source prior with one prediction-layer update epoch, positioning measurement-calibrated synthetic pretraining as a reusable prior for scarce target-flight measurements.

Thu 12 NovMachine Learning
The gist
Predicting wireless signals for drones is hard because the signals can change quickly and there isn’t much real data available. The paper shows that using synthetic data that mimics real drone signals can help train prediction models faster and with less real data. The authors also demonstrate a way to adjust these pretrained models quickly for new flights using only a small amount of data. This approach can make drone communication systems smarter and more adaptable in real-time.
Open → 2611.16646v1

MetaCom improves vehicle network communication under poor signals

MetaCom: Meta Codebook Learning for Robust V2X Semantic Communications

Abstract: Collaborative perception in Vehicle-to-Everything (V2X) networks faces dual challenges: strictly limited bandwidth and channel impairments. Existing static quantization schemes often suffer from feature manifold drift caused by highly non-stationary traffic environments. To address this, we propose MetaCom, a robust digital semantic communication framework featuring a Meta-Codebook Learning paradigm. First, we introduce a Differentiable Quantized Semantic Communications (DQSemCom) module trained with perturbations induced by the simulated digital modulation and channel via Gumbel-Softmax relaxation. Building on this, we design a Bi-Level Meta-Evolution Mechanism (Bi-MEM) that treats manifold drift as a sequence of rapid adaptation tasks, aligning the codebook via data-level smoothing and parameter-level meta-updates. Furthermore, we validate MetaCom under AWGN, Rayleigh, and Rician fading channels. Experimental results demonstrate that MetaCom achieves superior trade-offs between perception precision and communication overhead, outperforming state-of-the-art methods by a significant margin under low-SNR conditions.

Wed 11 NovInformation Theory
The gist
Vehicles that share information with each other and the environment often struggle with limited communication bandwidth and noisy channels, which can lead to errors. The authors created MetaCom, a new system that learns flexible codebooks to keep the shared information accurate even when conditions change quickly. It uses advanced training techniques to adapt on the fly and works well even when signal quality is low. Tests show MetaCom can better balance data needs and accuracy than previous methods.
Open → 2611.15359v1

5G indoor localization tested in real railway environment with AI methods

RAIL-5G: A Challenging Real-World Dataset and Benchmark for AI-Based 5G Indoor Localization

Abstract: Reliable radio-based indoor localization is essential for industrial automation, yet existing methods are often evaluated in environments that do not fully reflect the severe multipath and non-line-of-sight (NLOS) conditions encountered in real deployments. This limits our understanding of how AI, i.e., modern geometric, unsupervised, and semi-supervised localization methods generalize to industrial 5G settings. We present RAIL-5G, a public real-world 5G NR channel impulse response (CIR) benchmark recorded in an operational railway maintenance facility. RAIL-5G covers an 811m$^2$ indoor area with eight distributed radio units, robot-mounted user equipment (UE) trajectories, high-accuracy iGPS reference positions, and severe metal-induced multipath caused by train compartments and maintenance infrastructure. We benchmark geometric time-difference of arrival (TDoA), supervised fingerprinting, unsupervised channel charting, and self-supervised wireless pretraining methods. Our results highlight the difficulty of RAIL-5G: on the full dataset, TDoA reaches 7.02m mean average error (MAE), the best unsupervised method reaches 2.46m, and supervised fingerprinting achieves 0.52m. Self-supervised pretraining reduces the labeling effort by up to one order of magnitude, but the remaining gap to supervised learning shows that robust AI-based localization under severe multipath remains an open challenge. The dataset and code are available at https://iis.fraunhofer.de/rail-5g.

Sun 18 OctMachine Learning
The gist
Indoor positioning using radio signals is important for places like factories, but it's hard because signals bounce off metal and objects. The authors collected a big new dataset from inside a railway maintenance building with lots of obstacles and metal. They tested different AI and traditional methods to find devices inside this challenging environment. Their results show that while some AI methods help reduce errors and labeling work, achieving very accurate location under tough conditions is still quite difficult. They shared their dataset and code to help others improve 5G localization in real industrial settings.
Open → 2610.25201v1