Papers for

satellite navigation engineers

Papers whose findings have a practical use for this group, as judged from the abstract. Open a paper to read what it means in practice.

Event polarity timing improves spacecraft pose estimation accuracy

Polarity--Time Interaction and Multi-Level Reliability for Event-Based Spacecraft Pose Estimation

Abstract: Sparse event responses produce uneven keypoint errors whose effects on spacecraft pose depend on correspondence geometry and the reliability of successive observations. We present a reliability-aware framework connecting polarity--time localization, geometric recovery, event--CAD refinement, and trajectory optimization. A three-branch representation combines positive events, negative events, and recent-event timing through cross-branch attention and gating, followed by spatiotemporal aggregation. An ordered semantic-point head estimates relative correspondence precision for geometrically constrained pose recovery. Event-edge and CAD-projection agreement then guide local pose refinement under keypoint-geometry safeguards. At the sequence level, a ten-dimensional descriptor combines heatmap shape, reprojection consistency, and geometric conditioning to set time-aligned observation scales. On the official SPADES challenge test set, the complete system achieves a combined pose score of 0.0474, approximately 5.4\% below PASAN+IRIS. Validation ablations reduce the score from 0.0772 for base localization with uniform PnP to 0.0514 for the complete cascade; on identical single-frame observations, quality weighting reduces the score from 0.0549 with constant-weight optimization to 0.0514.

Tue 27 OctArtificial IntelligenceRobotics
The gist
Estimating the position and orientation of spacecraft using event-based sensors can be tricky because the sensor data is sparse and uneven. The authors developed a new method that carefully considers the timing and type (polarity) of sensor events, combines this information using special attention mechanisms, and checks the geometry to improve pose accuracy. They also refine the estimated position using a 3D model of the spacecraft and optimize results over time. Their approach performs better than previous methods on a standard spacecraft pose estimation challenge.
Open → 2610.36625v1

Doppler navigation geometric limits explained for low Earth orbit satellites

Geometric Analysis of Doppler-Based Navigation with Low Earth Orbit Satellites

Abstract: The increasing vulnerability of Global Navigation Satellite Systems has motivated renewed interest in Doppler-based navigation using low Earth orbit satellites, which can determine position, velocity, clock bias, and clock drift from carrier Doppler measurements. However, the geometric dilution of precision (GDOP) in this eight-state problem behaves fundamentally differently from the GDOP in pseudorange-based navigation. In particular, volume-based satellite selection, effective for pseudorange-based GDOP minimization, has been empirically found to perform poorly for Doppler GDOP. This paper establishes a geometric foundation for Doppler GDOP characterization. A closed-form geometric parameterization of the Doppler measurement Jacobian in terms of elevation, azimuth, inclination, and altitude ratio is derived. It is shown that the clock bias sensitivity depends on elevation, altitude, and the angle between the satellite velocity vector and the line of sight. This sensitivity produces a correlation with the clock drift that no geometric arrangement can remove. A Schur complement decomposition of the eight-state information matrix is performed, yielding an exact GDOP inflation formula, governed by a collinearity coefficient that measures the alignment between the clock bias column and a seven-state subspace. It is proven that the geometric coupling that renders clock bias observable is the same coupling that inflates estimation covariance, and that satellite altitude diversity reduces the collinearity by separating satellites at equal elevation onto distinct sensitivity bands. An example employing a two-shell satellite configuration illustrates the analysis.

Thu 10 SeptInformation Theory
The gist
Satellite navigation can use Doppler shifts to find a receiver’s position and clock settings, but this approach behaves differently from the usual method that uses distance signals. The authors analyze how satellite positions and movements affect the accuracy of Doppler-based navigation. They find that some errors in clock measurements always appear together, and no satellite arrangement can fully fix this. Satellites at different heights help reduce these errors. This insight helps understand how to pick satellites for better navigation accuracy using Doppler data.
Open → 2609.11296v1