Papers for
iot security engineers
Papers whose findings have a practical use for this group, as judged from the abstract. Open a paper to read what it means in practice.
Mobility-aware language model improves roaming iot device security detection
MAPLE-Sec: Mobility-Aware Partitioned Language-Model Engine for Roaming IoT Security
Abstract: Mobile Internet-of-Things (IoT) endpoints such as connected vehicles, wearables, and drones continuously cross heterogeneous network domains, creating handover-driven attack surfaces that static, cloud-anchored detectors cannot follow. However, three obstacles block real-time detection on such roaming endpoints: detection state is lost at every inter-domain handover; transmitting raw telemetry to a fixed detector exhausts the uplink and the device battery; and full-depth language model inference cannot meet millisecond latency budgets on constrained hardware. To tackle these challenges, we propose MAPLE-Sec, a mobility-aware partitioning framework that splits a compact, security-tuned language model across a roaming device and its nearest edge node. First, a trajectory-conditioned partition scheduler recomputes the split point from predicted handover timing, residual battery, and uplink quality. Second, a token-budgeted early-exit mechanism emits a verdict at the shallowest layer that meets a confidence threshold. Finally, a learned activation-compression codec migrates the intermediate inference state across edge nodes during handover without retransmitting raw telemetry. We formalize the partition-and-migration decision as an on-device constrained optimization solved in sub-millisecond time. Extensive experiments across the CIC-IoT and Edge-IIoTset corpora under both IID and non-IID roaming conditions demonstrate that MAPLE-Sec sustains detection across mobility events, improving the converged F1-score by up to 9.3\% relative to Cloud-only and by 2.9 percentage points over the strongest edge-collaborative baseline (EdgeShard), while reducing end-to-end latency by up to 2.5$\times$. Ablation confirms that the activation-compression codec reduces migration energy by 2.4$\times$ versus the raw-activation migration variant.
Security and efficiency compared for home automation encrypted connections
Security and robustness analysis of encrypted communications for local home automation: ESPHome Native API and MQTT over TLS 1.3
Abstract: The expansion of the Internet of Things (IoT) in residential and local automation environments has highlighted the limitations of considering the internal network as an inherently trusted domain. Man-in-the-middle (MitM) attacks, such as ARP spoofing, can allow traffic interception or manipulation when communications lack appropriate confidentiality, integrity, and authentication mechanisms. This paper presents a systematized review of the security mechanisms used by two communication alternatives between ESP-family microcontrollers and the Home Assistant platform: MQTT protected through TLS 1.3 and the ESPHome Native API, whose encryption is based on the Noise Protocol Framework using the Noise_NNpsk0_25519_ChaChaPoly_SHA256 pattern. The analysis considers four dimensions: cryptographic robustness, attack surface, implementation complexity, and resource consumption. The review identifies significant differences resulting from the architecture and cryptographic model of each alternative. TLS 1.3 provides a standardized framework compatible with public-key infrastructure and formal identity management, though it introduces greater configuration complexity and computational overhead during session establishment. The ESPHome Native API employs a more specialized scheme with lower operational complexity, eliminates dynamic algorithm negotiation, and uses ChaCha20-Poly1305. The resource-consumption analysis relies on measurements published by the projects and manufacturers themselves, not on an experimental test bench, and this limitation is explicitly acknowledged. The results identify the conditions under which each mechanism is appropriate for local home-automation architectures and provide a basis for designing IoT systems that balance security, interoperability, and resource constraints.
Edge iot security improved by three layer runtime verification system
Hybrid Hierarchical Runtime Verification for Edge-IoT Security: Combining MonPoly and RTLola
Abstract: Security monitoring of edge-IoT fleets faces three structural challenges. (i) A per-node monitor is cheap but cannot see attacks that coordinate across devices. (ii) A cloud monitor sees the full fleet but pays for that view in bandwidth. (iii) Even at the cloud, a monitor built on a single RV engine can be fooled by an attacker who compromises a device, raises one malicious request, and then goes silent: once the events stop, an event-triggered monitor has nothing left to evaluate. We propose a three-layer hierarchical runtime-verification framework that addresses all three. The edge layer classifies events as they happen, the gateway layer aggregates short windows of per-device behaviour, and the cloud layer runs two complementary RV engines. MonPoly handles first-order temporal correlation over the merged alert stream: coordinated overflow (which genuinely quantifies across devices) plus per-device multi-vector APT, escalation, and persistent-campaign patterns. RTLola handles a time-triggered silent-node property that an event-triggered engine cannot detect within a bounded delay under fleet silence. We evaluate the framework on a 15-actor Docker testbed covering eight attack profiles plus a silent-bypass scenario. In the controlled labelled testbed, every device-attributable incident the framework raises names an attacker-labelled device, and the RTLola tier catches silent-bypass attempts the event-triggered tier misses. Per-event monitoring stays in the microsecond range at the edge and gateway, with low end-to-end alert-to-incident latency at the cloud.
Trust management challenges and features in edge-enabled IoT security
Trust in Edge-Enabled IoT Security: Features, Challenges and Research Directions
Abstract: Providing autonomous intelligence, pervasive connectivity and usability to human life and industry has led to the emergence of the Internet of Things (IoT). To support time-sensitive and resource-constrained applications, IoT systems nowadays increasingly rely on edge computing. This brings computation and decision-making closer to end devices. In edge-enabled IoT architecture, latency and communication overhead are reduced, but interactions among a larger and more diverse set of devices, edge nodes, services, and data sources are introduced as well. In such environments, security and privacy mechanisms provide the foundation for protection, while trust management can assess the reliability of interacting entities and adapting secure decisions. In this paper, we systematically review the current state of trust management in edge-enabled IoT. To this end, we propose a comprehensive taxonomy that maps physical, network, and application architectural IoT layers against the consumer, commercial, industrial, and infrastructure IoT domains. We further investigate state-of-art research based on their trust design, how trust integrated into secure IoT operations, the attacks that effect trust management process. Based on these findings, we identify key gaps in current research and outline future directions for context-aware and adaptive trust management in edge-enabled IoT.
Multi-agent graph model finds logic flaws in blockchain iot devices
Detecting Logic Vulnerabilities Across the Contract and Device Layers of Blockchain-Enabled IoT With Multi-Agent Heterogeneous Graph Attention
Abstract: Blockchain-enabled Internet of Things (IoT) systems integrate smart contracts with embedded devices to support decentralized device management and access control. Their security therefore depends jointly on the logic of on-chain contracts and off-chain device firmware. Logic flaws in either layer can violate the same system invariants, such as unauthorized access, improper state changes, or unguarded privileged operations. Existing approaches rely on contract analysis, firmware analysis, and graph-based vulnerability detection. However, these methods typically focus on a single layer or artifact and often depend on predefined vulnerability patterns, emulation fidelity, or homogeneous representations that obscure security-relevant component roles. They also lack a unified architecture that supports different security tasks while remaining deployable on resource-constrained gateways. To address these limitations, we extend MA-HGAT into a cross-layer multi-agent heterogeneous graph attention framework that models contracts, firmware artifacts, device fleets, and transaction streams with a unified four-role, nine-relation schema. Role-aligned agents exchange heterogeneous evidence through cross-attention, while graph-, link-, and node-level heads support multiple detection tasks and a role-based gateway--cloud partition enables lightweight edge inference. MA-HGAT thus provides a unified and deployable framework for detecting logic vulnerabilities across the contract and device layers of blockchain-enabled IoT systems.