Papers for

indoor navigation system builders

Papers whose findings have a practical use for this group, as judged from the abstract. Open a paper to read what it means in practice.

Single radar captures 3D views both sides for mobile robots

Single-Radar Bilateral 3D Near-Field Imaging for Mobile Robots

Abstract: Mobile robots operating in homes need reliable 3D perception of nearby furniture and surrounding structures, yet recovering this information on both sides of the robot's path with a single forward-mounted millimeter-wave radar remains challenging because of near-field wavefront curvature, viewpoint-dependent target visibility, and limited elevation diversity. This paper presents a motion-assisted framework for reconstructing structures on both sides of a robot's trajectory. Our near-field model relates scene reflectivity to stepped-frequency multiple-input multiple-output (MIMO) observations across frequencies and robot positions using spherical paths from transmitter (Tx) to scatterer to receiver (Rx). Bilateral Tx combining provides wideband directional weighting, while sliding-aperture back-projection coherently focuses the measurements using near-field propagation distances. Top-K power fusion combines local images with different visibility. The reconstruction provides lateral-forward support for multi-layer height extraction, followed by guarded adaptive height refinement using the original MIMO channels. Experiments in controlled, office/study, and corridor environments produce mean lateral-forward localization errors of 4.65, 5.63, and 5.98 cm, respectively, with peak-to-background ratios (PBRs) exceeding 13 dB. The framework recovers bilateral 3D scattering structure from one forward pass using a single radar, without relying on learned representations of the scene.

Sun 8 NovRoboticsComputer Vision and Pattern Recognition
The gist
Mobile robots need to see their surroundings clearly on both sides, but using just one radar facing forward makes this hard. The authors developed a new technique that moves the robot and uses special radar signals to create detailed 3D images of objects on either side. Their method processes radar data carefully to focus on nearby objects and builds accurate maps showing shapes and heights. They tested it in real indoor areas and achieved good precision without relying on previous scene knowledge.
Open → 2611.11296v1

Bluetooth localization improves accuracy with fewer active devices

Scalable BLE Channel Sounding Localization with Ranging-Assisted PDoA

Abstract: Bluetooth Channel Sounding (CS) enables accurate phase-based ranging, but multi-anchor localization requires sequential ranging exchanges that limit scalability and increase measurement latency. This paper proposes Ranging-Assisted Phase Difference of Arrival (RA-PDoA), a scalable BLE localization architecture combining one active anchor performing a standard two-way CS exchange with multiple passive receive-only anchors observing the same transmissions. A channel-recovery framework is derived that enables passive anchors to reconstruct a channel response suitable for super-resolution delay estimation, allowing multipath-robust ranging without participating in a two-way exchange. Coarse arrival-time information is further used to bound the position estimate and reject inconsistent range solutions. A comprehensive evaluation characterizes the impact of multipath propagation, body shadowing, synchronization requirements, oscillator impairments, anchor placement, and deployment inaccuracies, thereby quantifying the practical infrastructure requirements for scalable BLE localization. Simulation results in modeled indoor environments show that RA-PDoA reduces the 90th-percentile localization error from 175.3 cm to 95.5 cm under body shadowing while maintaining an airtime requirement independent of the number of anchors. The results demonstrate that a single active ranging link enables scalable and multipath-robust BLE Channel Sounding localization.

Fri 6 NovNetworking and Internet Architecture
The gist
Finding the exact location of devices indoors is hard and usually needs many devices to talk back and forth, causing delays. The authors propose a new method where only one device actively communicates while others just listen, reducing delays and improving how many devices can be located at once. Their approach uses smart math to handle complicated signal paths and body interference. Tests show this method nearly halves location errors while keeping communication simple and fast.
Open → 2611.09451v1