environmental monitoring groups

Abstract: Remote sensing change detection is typically formulated as Siamese feature comparison, where two images are encoded independently and a decoder determines which discrepancies correspond to meaningful change. This is challenging because the encoders preserve both true scene changes and nuisance variations such as illumination, seasonal, radiometric, and geometric differences. We introduce ChangeJEPA, a bitemporal joint-embedding predictive architecture that reformulates change detection as latent post-state prediction. Given a pre-change image and partial post-change evidence, ChangeJEPA predicts the full post-change representation under two complementary conditions: a prior hypothesis derived from the pre-change scene and an updated hypothesis conditioned on observed post-change context. A joint-embedding predictive loss aligns both hypotheses with the target latent representation, encouraging semantic consistency while suppressing transient appearance variations. Change is then inferred from the disagreement among the pre-change representation, the observed post-change target, and the predicted latent states, capturing complementary evidence of change, prior surprise, contextual update, and prediction reliability. Across SYSU-CD, LEVIR-CD+, and CDD, ChangeJEPA consistently outperforms its decoder matched Siamese baseline by up to 1.51 IoU points and achieves the best IoU and F1-score on all three benchmarks, demonstrating the advantage of latent post-state prediction over direct feature comparison. Page: https://buddhi19.github.io/ChangeJEPA

Abstract: Pretrained Earth observation models may reduce the effort needed to map surface water, but their value depends on the alternative against which they are compared. We evaluated Prithvi-EO-2.0-Tiny using the 446 hand-labeled Sentinel-2 chips from 11 flood events in Sen1Floods11. A fine-tuned model, a frozen-encoder model, and an identical randomly initialized architecture were compared with a similarly sized U-Net, a larger Prithvi model, and spectral-index thresholds. Experiments varied the number of training chips, excluded events from model fitting, and measured computational cost and prediction reliability. With 252 training chips, U-Net achieved a water intersection-over-union (IoU) of 0.856 on the official test set, compared with 0.833 for fine-tuned Prithvi-Tiny. Pretraining improved the tiny transformer over random initialization by a reported 0.046 IoU with 25 training chips and 0.023 with 252 chips, but did not reverse the U-Net ranking. Across 11 event-exclusion evaluations, mean IoU was 0.768 for fine-tuned Prithvi-Tiny and 0.777 for U-Net; the paired interval included zero. Fine-tuned Prithvi-Tiny processed a 512x512-pixel chip in 16.1 ms on a GPU and 258 ms on a laptop CPU, compared with 30.6 and 665 ms for U-Net. Errors were concentrated near water boundaries, and high predictive entropy identified many, but not all, erroneous pixels. These results support a specific role for compact pretrained models: lower measured computational demand with competitive accuracy, rather than consistent superiority. Event-dependent performance, shared hyperparameter selection, and the distinction between observed water and newly inundated land delimit the conclusions.

Abstract: Remote sensing image change captioning (RSICC) describes in natural language the semantic changes between two images of the same scene captured at different times. Previous methods commonly merge the pair during repeated processing or combine intra-image and cross-image relations in one operation, weakening source identity and leaving the two temporal directions implicit. Without separate modules for intra-image and cross-temporal processing and a separate path for each direction, the contribution of each part cannot be measured on its own, so it remains unclear which part matters most, and the design of later models has no such evidence to build on. To address these issues, we propose DS-BiCA-Net, which assigns the two kinds of processing to separate modules and keeps the two images as separate streams throughout the encoder. A windowed state-space module models context within each image, and a bidirectional cross-attention module compares the two images along two directed paths that share their projections. The two modules use the same pre-normalisation residual architecture and differ only in their mixers, and the two streams are fused only in the aggregation head, so each module and each direction can be removed and its contribution measured on its own. Controlled experiments on LEVIR-CC and Dubai-CC examine operator interaction, temporal direction and module order, showing that intra-image refinement carries no benefit alone and becomes beneficial only when followed by bidirectional cross-attention, an order that outperforms the reverse at matched parameter count and FLOPs. The bidirectional module also outperforms either temporal direction alone. Our method reaches an S_m^* of 82.65 on LEVIR-CC, the highest among the published results compared, and 66.72 on Dubai-CC without geometric augmentation, the second-highest among the published results compared.

Abstract: Quantitative analysis of environmental phenomena increasingly relies on image-based measurements. In volcanology, the geometric characterization of volcanic plumes and clouds from RGB images remains hindered by the scarcity of dedicated segmentation solutions and partially handcrafted annotations remain widely prevalent. We present GuidedSAM-Plume, an open-source expert-guided framework tailored for the interactive segmentation of volcanic plumes and clouds. It leverages the zero-shot, spatial prompt-based capabilities of SAM2. The framework was thoroughly validated on a challenging dataset through dedicated segmentation metrics and field-relevant volcanological descriptors. From minimal user inputs, it is able to significantly increase performance compared to fully automatic dedicated solutions while preserving the reliability of derived volcanological parameters. The absence of retraining requirements lowers adoption barriers within the volcanological community, and the framework's demonstrated suitability for complex, diffuse plume-shaped phenomena extends its applicability to broader environmental science domains. The re-annotated dataset, produced under the guidance of expert volcanologists within the proposed framework, ultimately yields a more standardized release. The framework and accompanying dataset are made available at https://github.com/tad-damo/GuidedSAM-Plume.

Abstract: In remote sensing, open-vocabulary segmentation is particularly important for flexible and scalable land-cover understanding across diverse regions, as it improves generalization to novel categories without requiring exhaustive pixel-level annotations. Despite its great promise, progress in this area remains largely constrained by existing datasets with limited category coverage and overly coarse taxonomies, and therefore struggles to support fine-grained semantic understanding required in real-world applications such as urban functional zoning, carbon accounting, and post-disaster assessment. To address these challenges, we present OpenEarth-OVS44, a multimodal benchmark with 290,587 expert-verified segments from 2,832 RGB images and 1,341 strictly registered RGB-SAR pairs at sub-meter spatial resolution, covering 40 cities across France, Japan, and the United States under a unified 44-class taxonomy organized into 9 base categories. Three evaluation tracks are provided: an RGB-only fine-grained benchmark, a multimodal track with diverse synthetic cloudy conditions for weather-robust evaluation, and a held-out cross-region track. Extensive experiments on representative open-vocabulary segmentation models demonstrate that training on OpenEarth-OVS44 substantially improves fine-grained segmentation performance over the strongest training-free baseline, with improvements of up to 7.1 mIoU points on unseen categories and 27.6 mIoU points on seen categories. The dataset and code will be released.

Abstract: Multimodal ocean modeling remains challenging due to substantial heterogeneity in data structures, physical semantics, and spatiotemporal characteristics across satellite imagery, gridded oceanographic fields, and buoy observations. Existing approaches largely focus on task-specific ocean modeling, while learning transferable representations from heterogeneous observations remains an open problem. To address this challenge, we propose YingLan, a multimodal ocean foundation model that integrates physics-attribute-conditioned dynamic encoding, Spatiotemporal Increment Coupling (STIC), and ocean-state evolution-aware pretraining. Specifically, the dynamic encoding mechanism generates adaptive input projections conditioned on physical semantics and observation characteristics, enabling flexible representation of heterogeneous ocean variables. STIC models multiscale spatiotemporal dependencies through cross-scale interactions of latent temporal increments. The pretraining strategy further combines masked observation reconstruction with temporal evolution objectives to facilitate the learning of coherent ocean-state representations across different prediction horizons. YingLan is implemented using MindSpore and trained on Huawei Ascend 910B NPUs, demonstrating its compatibility with domestic AI computing infrastructure. In a seven-day sea surface salinity (SSS) forecasting task conducted in the Shenzhen coastal waters, YingLan achieves an average RMSE of 0.687508 PSU, corresponding to relative error reductions of 0.58%, 5.31%, and 12.42% compared with LangYa, XiHe, and GloNet2, respectively. These results provide initial evidence of the model's effectiveness in regional ocean forecasting, while broader cross-task and cross-regional evaluations remain necessary to assess its generalization capabilities.

Abstract: Building a co-registered SAR-optical corpus for self-supervised Earth Observation is above all an acquisition problem, yet the main multi-modal datasets are collected opportunistically, with no per-stratum quota control and no mechanism against the geographic dropout that non-uniform cloud cover leaves behind. We present Deficit-Driven Stratified Acquisition (DDSA), an algorithm that treats building a co-registered Sentinel-1/Sentinel-2 corpus as a constrained maximum-coverage problem over a hemisphere-corrected (class x season x region) stratification, enforces strict temporal pairing and a multi-stage quality gate, and closes the loop during acquisition with a human-in-the-loop deficit-repair stage. Measured on its own product, the algorithm yields three results a single-pass acquisition cannot report. Deficit-driven ordering makes a partial run a covering one: it holds every one of the 192 strata populated from the first few percent of the budget, where an abundance-first order leaves most strata empty until the end. Whether a failed attempt can be recovered depends on the temporal persistence of its cause, not the kind of defect: geometric failures such as nodata are among the most repairable (eta = 41.4%) while cloud is among the least (eta = 18.8%), because a cloudy location is cloudy on most dates of its season. The repair loop supplies 39.5% of the released pairs at no measurable quality cost, with 89.8% surviving manual review. The quality guarantee has a price: 2,928,370 acquisition attempts produced 740,746 released pairs. We release the corpus, STRATA-S12, with STAC/PDS4-aligned FAIR sidecars, and a pre-registered linear-probe check confirms it is fit for self-supervised pre-training. A metadata-level coverage comparison against SSL4EO-S12 and SEN12MS situates the corpus over a shared frame; systematic cross-corpus and cross-method comparison is left to follow-up work.

Abstract: Partial differential equation (PDE) inverse problems are often ill-posed, making fine-scale details difficult to recover. We address this problem by introducing a learned observation-complementary latent representation that preserves reconstruction-relevant information and is combined with the observation to reconstruct the unknown field. Building on this representation, we propose OCL-PDE, a generative framework that encourages the observation to guide large-scale structure and the latent to supply complementary fine-scale details. OCL-PDE is built on a physics-aware autoencoder (AE) and conditional Flow Matching, supporting inverse reconstruction as well as forward PDE prediction. Experiments demonstrate improved reconstruction accuracy and fine-detail recovery compared with the evaluated baselines.

Abstract: We present the Neuro-Physical Inverter (NPI), a modular, uncertainty-aware framework for geophysical inversion that couples ensemble-based conditioning with constrained residual learning, demonstrated in the 1D magnetotelluric (MT) setting as a controlled testbed. The framework operates in two stages. An Ensemble-Conditional Gaussian Process (EnsCGP) conditions a prior ensemble of resistivity models on the observed response, producing a physically admissible reference ensemble. A residual-learning neural network then predicts targeted corrections to this reference, trained on synthetic data and fine-tuned per station for field application through a physics-coupled objective. Because an ensemble is conditioned, refined, and propagated through both stages, every estimate carries an associated ensemble spread. Synthetic experiments show that NPI systematically reduces ensemble-mean error without destabilizing the ensemble. Applied to broadband MT data from the Gabbs Valley geothermal region (Nevada, USA), NPI reduces the across-station mean misfit over the mid-period band while retaining comparable ensemble spread. The propagated ensemble yields a factor of uncertainty that serves as an operational measure of constraint within the assumed model class. Both stages are dimension-agnostic in formulation, and the design principles established here are intended to scale to higher-dimensional parameterizations.

Abstract: Federated learning (FL) has recently attracted increasing attention in remote sensing (RS) since it enables collaborative model training across decentralized RS image archives without requiring direct access to local data. However, FL performance significantly degrades when the data distributions between clients are heterogeneous, which often occurs due to geographical differences, seasonal changes, and varying image acquisition and atmospheric conditions. To address this challenge, in this letter, we propose a novel personalized FL framework (denoted as FedMAD) for RS image classification problems. The proposed framework separates globally shared representation parameters from client-specific adaptation parameters to preserve client-specific features while maintaining globally transferable representations. This is achieved by integrating lightweight modulation modules and local batch normalization layers into the backbone network. Although globally shared parameters are collaboratively optimized between clients, client-specific parameters remain local to preserve domain-specific feature characteristics. In addition, FedMAD introduces a modulation-aware directional aggregation strategy that dynamically adjusts the importance of aggregation for each client according to the alignment of local modulation updates. This allows the global optimization process to suppress conflicting client updates originating from heterogeneous data distributions while enhancing the contribution of clients with consistent adaptation behaviors. The experimental results obtained on the BigEarthNet-S2 and EuroSAT datasets demonstrate the effectiveness of FedMAD compared to state-of-the-art FL algorithms under heterogeneous RS data distributions. The code of the proposed framework will be publicly available at https://git.tu-berlin.de/rsim/fedmad.

Abstract: Achieving cross-sensor generalization and arbitrary-scale reconstruction with a single model remains challenging in hyperspectral super-resolution (HSR). Although recent methods support arbitrary-scale reconstruction, applying them to new sensors or scales beyond the training range often requires additional data and computation to maintain reconstruction quality. To address these challenges, we propose OmniHSR, which predicts band-shared spatial operators rather than spectral values. Cross-Spectral Mapping (CSM) resamples inputs with any number of bands to fixed reference positions and predicts local operators with Gaussian supports. Continuous Operator-Field Reconstruction (COFR) composes these operators into a continuous field and applies them to all original bands for arbitrary-scale reconstruction. Experiments demonstrate that operator prediction outperforms direct spectral-value prediction on all seven datasets. Trained solely on ARAD with only 0.538M parameters, OmniHSR outperforms all directly transferred baselines on six unseen datasets without target-domain training data or adaptation. Across twelve upsampling factors from $\times2$ to $\times48$, it improves average PSNR on Pavia U and Chikusei by 0.55 dB over the strongest baseline. It also surpasses baselines trained from scratch or adapted on the target sensor and achieves up to $36\times$ faster inference. Our code will be publicly released soon.

Abstract: This article introduces an algorithm that uses a U-Net architecture to determine vertical ground surface displacements from unmanned aerial vehicle (UAV)-photogrammetry point clouds, offering an alternative to traditional ground filtering methods. Unlike con-ventional ground filters that rely on point cloud classification, the proposed approach em-ploys heteroscedastic regression. The U-Net model predicts the conditional expected val-ues of the elevation corrections, aiming to reduce the impact of vegetation on determined ground surface elevations. Concurrently, it estimates the logarithm of the elevation cor-rection variance, allowing for direct quantification of the uncertainty associated with each elevation correction value. The algorithm was evaluated using three metrics: the root mean square error (RMSE) of vertical displacements, the percentage of nodes with deter-mined displacement values, and the percentage of outliers among those values. Perfor-mance was assessed using the technique for order of preference by similarity to ideal so-lution (TOPSIS) method and compared against several ground-filter-based algorithms across four datasets, each including at least two time intervals. In most cases, the U-Net-based approach demonstrated a slight performance advantage over traditional ground filtering techniques. For example, for the U-Net-based algorithm, for one of the test da-tasets, the RMSE of the determined subsidences was 6.1 cm, the percentage of nodes with determined subsidences was 80.5%, and the percentage of outliers was 0.2%. For the same case, the algorithm based on the next best model (SMRF) allowed an RMSE of 7.7 cm to be obtained; for 77.3% of nodes, the subsidences were determined; and the percentage of outliers was 0.3%.

Abstract: Satellite observations, precomputed embeddings, and map products describe the same evolving Earth, yet are stored as independent, petabyte-scale data products. Their continued growth calls for compact representations of multiple products while preserving spatial and temporal detail. We introduce Planetary Feature Fields (PFFs), which exploit redundancy across data products by modeling them jointly as continuous functions of space and time at planetary scale. PFFs are spatially local explicit-implicit (hybrid) neural fields. Each field shares a factored feature volume---a decomposition of an explicit 3D grid with smaller factors---across products, while lightweight implicit decoders reconstruct individual products across multiple timesteps. PFFs reconstruct EO products over space and time more accurately than single-product fields at matched compression rates. At $1800\times$ compression relative to the uncompressed source data, reconstructed features retain approximately $90\%$ or more of the performance achieved with the original features on pixel-level segmentation, change detection, and patch-level classification tasks. PFFs can add new timesteps by extending their factored feature volumes and add new products by attaching new decoders, while leaving existing outputs unchanged. PFFs reduce end-to-end feature access latency by an order of magnitude relative to evaluated API and cloud-storage pipelines.

Abstract: Multivariate time series contain complex patterns that span across both space and time. While covariance-based statistical tools like spatiotemporal Principal Component Analysis (ST-PCA) help identify these patterns, they are limited to linear operations and prone to estimation errors with limited data. Recent covariance-based spatiotemporal neural networks offer more stable, non-linear alternatives, but they ignore correlations across different time steps. To solve this, we introduce the Kronecker coVariance Neural Network (KVNN), a temporal graph neural network that represents the spatiotemporal covariance matrix via a sum of Kronecker products where spatial and temporal dependencies are decoupled. By implementing filtering operations on spatial and temporal components, KVNNs achieve expressive processing capabilities, admit a rigorous spectral analysis, and are provably stable to finite-sample estimation errors, ultimately addressing all of ST-PCA's limitations. We show on five real-world datasets that KVNNs achieve strong forecasting performance, often requiring significantly fewer trainable parameters than competitive methods, and are consistent under estimation noise.

Abstract: Electricity forecasting often involves spatially related signals observed over regions, substations, and feeders, and Graph Neural Networks (GNNs) provide a natural way to represent these relations. Building a complete GNN forecasting experiment is nonetheless laborious, because graph construction, model selection, training, aggregation, and interpretation sit in incompatible tools. We present GraphToolbox, an open-source Python framework that unifies these stages in one configurationdriven pipeline built on PyTorch Geometric. It offers data-driven graph construction, an adapter that instantiates and trains 51 of the 65 PyTorch Geometric convolutions together with the recurrent cells of PyTorch Geometric Temporal, online expert aggregation, forecasting interpretability, and significance testing on cached forecasts. We evaluate the pipeline in two case studies. On French regional load, the 48 convolutions included in the complete forecasting sweep fall in a band from 1.14% to 1.60% error, online aggregation lowers this to 0.98%, and the graph models improve on classical additive and boosting baselines. On net-load, direct graph models are less accurate than a classical additive model, while forecasting each physical component separately improves them without closing that gap. Both comparisons use the same experimental interface, illustrating the role of GraphToolbox in systematic architectural evaluation.

Abstract: Accurate seafloor mapping is essential for marine science, archaeology, and environmental monitoring. However, integrating data from different sensors, such as side-scan sonar and optical cameras, collected across separate survey sessions, remains challenging due to positioning drift and sensor offsets. This paper presents a multi-session, multimodal underwater mapping framework based on factor graph optimization. The method jointly optimizes vehicle trajectories, 3D landmark positions, sensor extrinsics, and per-session global alignment transformations. By combining rigid inter-session corrections with local trajectory deformations, it compensates for both inter-session offsets and intra-session distortions from accumulated navigation errors. The proposed methodology was validated on real-world datasets collected along the Catalan coast. Results show measurable improvements in map consistency over both unoptimized and rigid-alignment baselines across all metrics, including Pixel Accuracy and mean Intersection over Union. The method achieves a 3.4% improvement in pixel accuracy over the unoptimized baseline, corresponding to improved semantic labelling across approximately 14700 $\text{m}^2$ of mapped area. Qualitative results further show consistent co-registration between sonar and optical maps, even in the presence of significant trajectory distortions and inter-session misalignments. These findings demonstrate the potential of the proposed framework to generate coherent multimodal seafloor maps from heterogeneous underwater surveys.

Abstract: Understanding and predicting wildlife movement is critical for ecology and conservation. While trajectory forecasting has advanced for human and vehicle movement, wildlife trajectories present distinct challenges: they are unconstrained in space, highly stochastic, and influenced by environmental conditions. We introduce MoveBench, the first large-scale benchmark for probabilistic wildlife movement forecasting, containing 2.6M GPS locations from 800+ individuals across 110 species in 127 countries, paired with 1.6B environmental raster tiles capturing 160 covariates known or hypothesized to influence movement. We propose a probabilistic evaluation protocol for movement trajectory forecasts, addressing limitations of point-prediction metrics for inherently stochastic phenomena. Through comprehensive empirical evaluation of four method families across multiple temporal and spatial scales, we reveal that: (1) existing predictive methods generalize better to future timepoints than to unseen individuals, (2) deep learning approaches do not consistently outperform simpler baselines, and (3) environmental covariate selection significantly impacts performance. MoveBench enables standardized evaluation of movement forecasting methods and provides a foundation for methodological advances on this ecologically important task.