Papers for

emergency response operators

Papers whose findings have a practical use for this group, as judged from the abstract. Open a paper to read what it means in practice.

Thermal UAVs find location using 2D satellite maps without GNSS

ScalLoc: Continuous Oblique Thermal UAV Geo-Localization with a 2D Satellite Map

Abstract: Cross-modal Thermal Geo-localization (TG) provides an illumination-robust positioning solution for Unmanned Aerial Vehicles (UAVs) in Global Navigation Satellite System (GNSS)-denied environments. However, existing thermal geo-localization methods mainly focus on near-nadir observations or depend on map-side elevation priors, limiting their applicability to continuous oblique thermal localization with only geo-referenced 2D satellite maps. To address this problem, we propose ScalLoc, a scale-aligned local-to-map localization framework for continuous oblique thermal UAV geo-localization. ScalLoc follows a reconstruction--refinement--anchoring--propagation design: it reconstructs local window geometry from thermal sequences, refines camera poses using track-based pose optimization, adaptively anchors each window to the satellite map, and propagates validated states to recover frame-level global trajectories. To support systematic evaluation, we construct Thermal-Oblique, a real thermal UAV sequence dataset containing 216 urban and rural day--night trajectories and 28,112 thermal frames with frame-level annotations. Extensive experiments demonstrate that ScalLoc reduces the mean localization error from 112.69 m to 26.97 m compared with the VGGT-only configuration, corresponding to a 76.07% reduction, and achieves the lowest frame-weighted mean position error among the compared methods. These results demonstrate the feasibility of continuous oblique thermal geo-localization using only lightweight 2D satellite maps, without requiring digital surface models or preconstructed 3D maps. Code and dataset are available at https://github.com/FloralHercules/ScalLoc.

Sat 10 OctComputer Vision and Pattern Recognition
The gist
UAVs often struggle to know their exact location when GPS signals are unavailable, especially at night or in tough environments. The authors developed ScalLoc, a way for drones with thermal cameras to determine their position continuously by matching their thermal images with standard 2D satellite maps. Unlike previous methods that needed special 3D maps or elevation information, ScalLoc works with just simple 2D maps. The authors also created a large real dataset of thermal images for testing, showing their method reduces location errors by over 75%.
Open → 2610.14866v1

Micro aerial vehicles enable safer indoor 3d mapping with return to home safety

Return-to-Home Feasible Micro-Aerial Vehicle Exploration for 3D Gaussian Splatting Reconstruction

Abstract: Micro aerial vehicles (MAVs) enable rapid indoor 3D reconstruction for inspection and time-critical situational awareness, but must operate under strict flight-time budgets and safety constraints that require explicit return-to-home (RTH) feasibility with a conservative margin. We present a topology-first active reconstruction framework that decouples high-fidelity rendering from navigation. A dense 3D Gaussian Splatting (3DGS) map is optimized as the reconstruction target, while a lightweight Truncated Signed Distance Field (TSDF)/occupancy scaffold supports conservative collision checking and online construction of a sparse 3D Voronoi skeleton roadmap. Since directly extracting roadmaps from TSDF geometry can be unstable under noisy and incomplete online fusion, we validate nodes and edges using carved free-space consistency and dense visibility checks, which suppress behind-wall phantom structure and stabilize planning. Viewpoints are selected on the roadmap using a flight-time-budget-aware objective and a lightweight receding-horizon lookahead to improve non-myopic exploration behavior. We evaluate on photorealistic indoor simulation benchmarks (ReplicaCAD, Gibson, and HM3D), reporting reconstruction coverage/error, RTH success, and computational cost. Results demonstrate improved or competitive performance relative to recent GS-based baselines under identical flight-time budgets.

Fri 2 OctRobotics
The gist
Flying tiny drones indoors to create 3D maps is tricky because they have limited battery life and need to return safely to their starting point. The authors created a new system that helps drones explore while making sure they can get home safely by building a simple navigation map that avoids obstacles. Their method uses two types of 3D models—one detailed for mapping and one simpler for planning paths—to improve safety and efficiency. They tested it in realistic indoor simulations and found it performs well compared to similar methods.
Open → 2610.04013v1