Papers for
electrical protection engineers
Papers whose findings have a practical use for this group, as judged from the abstract. Open a paper to read what it means in practice.
Machine learning fault detectors show more false alarms across relay locations
Characterizing Cross-Relay Generalization Failure in Machine Learning-Based Power System Protection
Abstract: Machine learning-based fault detectors are often evaluated at the relay locations used for training, although local voltage and current measurements vary across power networks. This work investigates cross-relay generalization for binary detection of faults anywhere in the network using local measurements, rather than line-selective tripping. Using 50 ms windows from a simulated 110 kV transmission network, we evaluate a multilayer perceptron across all 64 source target combinations of eight relays and five random seeds. A shared simulation-level split and source-only threshold selection provide a controlled held-out evaluation without target-specific calibration. Despite nearly unchanged mean F1-scores (0.730 within-relay versus 0.734 cross-relay), the mean false-positive rate (FPR) increases from 0.088 to 0.341, while the mean false-negative rate decreases from 0.399 to 0.318. The change is strongly directional: models trained at Bus 2 relays yield a mean FPR of 0.670 at Bus 1 and Bus 3 relays, compared with 0.096 for cross-relay transfers within the same bus group. Linear probing indicates that learned representations retain coarse bus-group information, while exploratory class-conditional latent distribution analysis shows no consistent monotonic association with transfer errors. These findings demonstrate that aggregate metrics can conceal location-structured changes in false-alarm behavior, highlighting the importance of evaluating error types separately when assessing cross-relay generalization.
Offline rl selects faulted lines accurately in simulated power grids
Offline Reinforcement Learning for Distribution-Grid Protection
Abstract: Data-driven protection may complement conventional relays in distribution grids whose operating conditions vary with distributed generation, switching events, and changing short-circuit levels. We study line-selective tripping from static trajectories of a realistically simulated CIGRE medium-voltage network using offline reinforcement learning. A convolutional Q-network receives causal voltage-current phasor and apparent-impedance features, optionally together with raw waveforms, and is trained with conservative Q-learning (CQL). A controlled sensitivity study evaluates two observation windows, reward variants, and three CQL weights under a common split and training protocol; one exploratory post-hoc run additionally increases the discount factor from $γ$=0.95 to 0.99. On 225 held-out episodes, the best per-timestep result is obtained with combined input and CQL weight $α$=0.9, reaching precision 0.9993, recall 0.9496, and F1-score 0.9738. Because dense per-timestep scores do not encode the terminal semantics of relay operation, we also evaluate the first non-wait action in each episode. The default combined-input agent selects the correct line-trip action first in 98.13% of 214 fault episodes, but trips in 72.73% of the 11 non-fault episodes. In the post-hoc run, the corresponding rates are 98.60% and 54.55%, respectively. The results show that dense predictive performance and terminal protection behavior can lead to different model rankings. Offline CQL therefore demonstrates strong faulted-line selection on the simulated fault episodes, while the static trajectories, small non-fault set, and single-seed post-hoc design preclude conclusions about practical relay security or deployment readiness.