Papers for

aerial robotics engineers

Papers whose findings have a practical use for this group, as judged from the abstract. Open a paper to read what it means in practice.

Soft pneumatic wings mimic bat flight with smooth flapping motion

Flap like a bat: Soft pneumatic wings for biomimetic ornithopters

Abstract: This paper describes the development of a bio-inspired ornithopter wing mechanism that uses soft pneumatic actuators, such as PneuNet structures, in place of revolute joints, inspired by the complicated kinematics of bat flight. The proposed design employs pneumatically driven air pockets within a flexible wing skeleton to achieve smooth, lifelike flapping motion. The actuation system is controlled by 3/2-way solenoid valves and an air pump, which manipulate airflow and actuator deformation. We demonstrate, using ANSYS FEA software, the bending behavior of the PneuNet actuators under varying pressures to inform the wing's structural design. The implementation of soft robotics in the flapping-wing system offers potential advantages over traditional mechanisms, such as reduced mechanical complexity, lower acoustic signatures, enhanced adaptability, and wing morphing. This work demonstrates the feasibility of replacing rigid revolute joints with compliant pneumatic actuators, enabling more agile, silent, and biomimetic aerial robots.

Sat 31 OctRobotics
The gist
Flapping-wing flying robots usually have rigid moving parts that can be noisy and complex. This paper shows how the authors replaced those hard joints with soft, air-filled parts that bend when inflated, inspired by how bats flap their wings. They used computer simulations to design these flexible components and built a system to control the air pressure, achieving smooth and quieter wing movements. This approach may lead to flying robots that move more like real bats and have simpler, quieter wings.
Open → 2611.00879v1

Tilt-rotor quadcopter improves hover control using learned wind compensation

Tilt-Rotor Quadcopter with Learned Residual Control and Mode-Dependent State Estimation

Abstract: Tilt-rotor quadcopters redirect thrust for translation without banking, but complicate modeling, state estimation, and disturbance rejection. This paper presents a simulation-based flight stack for a \SI{2.00}{\kilo\gram} tilt-rotor quadcopter. The system uses a six-degree-of-freedom nonlinear model with first-order motor dynamics and two-axis rotor tilt, parameterized using a 3D CAD model. A cascaded PD controller commands forward and lateral tilt angles. A 14-state EKF fuses sensor data across hover, early-transition, and transition modes using a hysteretic (Schmitt-trigger) classifier to prevent covariance discontinuities. Because the proportional position loop leaves a steady-state offset under constant wind, a small bounded neural residual is added on top of the unmodified PD controller. It is trained by behavioral cloning from a teacher with privileged access to the true wind, while the deployed network never observes wind. In simulation, the EKF achieves a post-settling position root mean square error (RMSE) of \SI{0.226}{\metre} (horizontal) and \SI{0.03}{\metre} (vertical) and an attitude RMSE below \SI{0.8}{\degree}, and it estimates a wind velocity of $(\num{2.0}, \num{-1.2})\,\unit{\metre\per\second}$ to within \SI{0.15}{\metre\per\second} per axis. The residual reduces steady-state station-keeping error under wind by approximately \SI{49}{\percent}, from \SI{0.117}{\metre} to \SI{0.060}{\metre} at \SI{1.5}{\metre\per\second} and from \SI{0.319}{\metre} to \SI{0.162}{\metre} at an out-of-distribution \SI{3.9}{\metre\per\second}. The framework provides a basis for hardware-in-the-loop and flight-test studies.

Thu 22 OctRobotics
The gist
Tilt-rotor quadcopters can fly straight without leaning, but controlling them is tricky because their mechanics are more complex. The authors created a simulation of such a quadcopter that uses careful math modeling and a special sensor fusion method to know exactly where it is and how it’s oriented. They also taught a small neural network to correct steady position errors caused by wind, even though the network never directly senses the wind itself. In their tests, this approach cut static position errors from wind nearly in half compared to standard control.
Open → 2610.31051v1

UAV lands safely on moving ship deck using new AI control method

Barrier-Shaped Recurrent Reinforcement Learning for Autonomous Landing on a Heaving Ship Deck

Abstract: This paper addresses autonomous landing of unmanned aerial vehicle (UAV) rotorcrafts on a heaving ship deck using a recurrent policy trained via asymmetric actor-critic reinforcement learning: the critic sees 6 s of future deck height during training, while the actor sees only what the onboard sensors provide in flight, a 17-dimensional state made of the vehicle's position, velocity and attitude relative to the deck and outputs world-frame velocity and yaw-rate commands. Training is performed across 4096 parallel simulated environments, followed by fine-tuning in 16 environments with an onboard vision pipeline in the loop. A control-barrier-function (CBF) stopping margin on the deck-relative vertical state is incorporated at two stages: as a reward term during training, where it halves the median simulated contact speed relative to a policy trained without it, and as a runtime safety filter at deployment, evaluated at every control step to abort and retry the descent when the margin is violated. Because the autopilot's disarm logic cannot detect the vehicle resting on a moving deck, proximity-based thrust cutoff at touchdown is commanded directly in the landing pipeline. The proposed approach is validated using a parallel-manipulator-platform-based deck emulator that reproduces the heaving motion of the ship deck (scaled to 0.70 m peak-to-peak, 7.5 s mean period) and a quadcopter UAV with an onboard camera. Across 31 motion-capture and 20 vision-based trials, the UAV landed every time, with median times to contact of 6.5 and 7.3 s; 77% and 50% landed on the first attempt, with mean deck-relative speeds of 0.29 and 0.27 m/s, respectively, at the instant of thrust cutoff, which is the last speed under the policy's control. Supplementary video: https://youtu.be/S5hDkrSZJt4

Fri 2 OctRobotics
The gist
Landing a drone on a ship's deck is difficult because the deck moves up and down with the waves. The authors trained an AI controller that remembers past data and uses safety checks to reduce landing speed and avoid crashes. They tested it on a fake ship deck that moves like a real one, and the drone landed successfully every time in over 50 trials. This method helps drones land smoothly on ships even with complex, bumpy motion.
Open → 2610.03924v1

UAV swarm tracking improved by motion prior guided feature correction

EECTracker: Swarm Motion Prior-Guided Feature Compensation for Airborne Optical UAV Swarm Tracking

Abstract: Airborne optical tracking of uncrewed aerial vehicle (UAV) swarms is challenging due to extremely small target scales, rapid viewpoint changes, and cluttered backgrounds, which can weaken target feature responses and lead to intermittent or temporarily missing detector responses. Existing multi-object tracking methods generally depend on reliable target-specific detector responses to maintain target states and identities across frames. When such responses become unreliable, target states cannot be reliably updated and cross-frame association cues become ambiguous, resulting in fragmented trajectories and identity switches. To address this problem, we propose EECTracker, a swarm-motion-prior-guided joint detection-and-tracking framework for airborne optical UAV swarm tracking. EECTracker constructs a probabilistic swarm motion prior from reliable historical tracklets to capture the shared short-term image-plane motion tendency of the swarm and its uncertainty, providing spatial guidance for cross-frame feature compensation. Building on this prior, we introduce Energy--Entropy Consistency Activation (EEC Activation) to evaluate motion-prior-conditioned feature consistency using feature residual energy and local residual entropy. The resulting Local EEC score guides pixel-level feature compensation by enhancing motion-prior-consistent feature responses in potential target regions while suppressing inconsistent background responses. Experiments on AIRMOT and UAVSwarm show that EECTracker achieves superior overall tracking performance compared with state-of-the-art methods. Compared with the strongest competing method SCT-MOT, EECTracker improves MOTA/IDF1 by 3.89/1.79 percentage points on AIRMOT and by 2.81/1.74 percentage points on UAVSwarm, while maintaining online inference speed.

Mon 14 SeptComputer Vision and Pattern Recognition
The gist
Tracking groups of drones using cameras is hard because drones look very small and move quickly against busy backgrounds, which makes it tough to keep track of each one. The authors designed a new method called EECTracker that learns how the drone swarm tends to move together and uses that information to fix and improve the features used for tracking. Their method helps avoid losing track of drones or confusing their identities, leading to better overall tracking accuracy compared to previous approaches.
Open → 2609.15171v1